Tianjie's attitude towards products: conductor chapter

Focus

This year, 315 exposed the Guangfo electro mechanical market sales of wire and cable divided into national standardcable and non-standard cable, the so-called discount line, 80% discount lineand even 6% discount line, the price it is also only national standard line of80%, 60% discount. In fact, in China's cable industry this phenomenon has along history, as early as 2017 in Shaanxi Aokai cable event, in order to obtain profits desperately from the cable material article, cutting corners to produce unqualified products, and ultimately the person in charge of the indictment,jailed.

Understanding Product Standards

So, how do we go to understand what is the standard cable? First of all, we must know that all wire and cable products have production standards, such as: national standards, industry standards, local standards, group standards, corporate standards and so on.That is to say that the product will have a standard to follow, the product must be tested, in line with certain standards before entering the market for sale. When the product does not meet the standard that is non-standardproducts. Non-standard cable there is a risk of use, light impact on theservice life or transmission performance is reduced, or there are serious safety hazards or even on the safety of life and property hazards.

Therefore, as a cable manufacturer in making standard products, which is both their own bottom line, but also social responsibility, can never be profit-oriented, break the bottom line irresponsibly do.

We all know that the general wire and cable main cost in the conductor, as the most commonly used conductor -copper wire, determines the product is good or bad. How to go to determine it?General about the cable conductor standard interpretation of two points, one isthe cross-sectional area of the cable, also we often say how many square or how many numbers of wire gauge. Another point is the corresponding conductor cross-section resistance. Once also has been debated, in the end should be done enough cross-section or comply with the resistance? Which is considered to meetthe standard? Interpretation in our country is: cross-sectional area only as anominal value is not the basis for judgement, but the conductor resistance as ajudgement value must meet the requirements. In the absence of special provisions of the requirements of reference to the national standard ‘GB / T3956 cable conductor’ for determination.

Nowadays, the purity of copper is getting higher and higher, the resistivity is getting smaller and smaller, sothe cross-section is also getting smaller and smaller, keeping the conductor resistance less than or equal to the national standard requirements that is the standard line. But in the United States UL standards but also have higher requirements. For example, in UL 444, UL 13 and other standards, the conductor requirements not only need to comply with the conductor resistance at the same time also specifies the minimum size of the cable conductor. I think this isalso after continuous revision, put forward to the quality of higher requirements for the conclusion.

Tianjie's product standards

Tianjie's understanding is also thesame, the standard given is often the minimum requirements, the product is infinitely close to the minimum, for the product itself or the use of the occasion is not any good, so the conductor is better than the standard is the normal product requirements.

Homogenised product market competition can be said to have reached a white-hot, so cutting corners or even non-standard discount line is not surprising. Stick to product quality, do standard products may be the traditional cable manufacturing enterprises face the most difficult test.

Tianjie's attitude towards products

Tianjie insists on using high quality oxygen-free copperas the conductor material, because we know that only excellent inner core can make excellent products; we insist on the conductor resistance value conforming to the standard requirements as the bottom line, from design to production toquality control, we insist on conforming to the product standard as the first principle.

Tianjie adhere to the original intention, thirty years of consistency, to do business and dopeople the same, only quality to win customers, in order to get the respect ofthe market!